There are many kinds of computerized embroidery machines with different specifications. At present, there is no unified classification method. Generally speaking, the following classification methods are commonly used:

1. It can be divided into single head and multi head (2-24 heads) according to the number of heads;

2. It can be divided into single needle and multi needle (3-12 needles) according to the number of needles in each end;

3. It can be divided into plate type and cylinder type in the form of feeding frame;

4. In the form of embroidery stitch, it can be divided into lock stitch (301 stitch) and chain stitch (101 stitch). As there are many problems in each model, such as how many heads, how many needles, the form of stretcher and the form of stitches, the combination, arrangement and classification of these problems will make embroidery model a large number, so it can meet the needs of customers with different levels, the same scale and different requirements.

 First, the embroidery CAD software is used to make the plate, and then the sample plate is generated. Then, the disk containing the embroidery program and the pattern is put into the computer disk drive successively. Under the control of the program, the computer changes the coordinate value of the pattern into the electrical signal equivalent to the displacement in X and Y directions of the frame, and sends it to the X, y and Z single machine system for motor After speed up and down processing, the three-phase six time sign is output. The power amplifier box of the line motor is used for power amplification, and the red X and Y stepping motors are used to drive the stretch frame to complete the feed movement between X and Y; at the same time, the Z stepping motor is driven, and the needle with the motor moves up and down, so that the embroidery can continue.

The z-step motor drives the transmission mechanism of the head to rotate through the synchronous toothed belt and so on. The specific mechanism of the head makes the lead mechanism and the needle take the lead to make and move down the surface line and puncture the fabric; the rotary shuttle in the hook mechanism rotates to make the surface line bypass the bottom line shuttle shell; the take-up mechanism moves to transport the surface line, tighten the line trace and prepare the surface line segment of the next line trace. 10. Y-step motor drives silk frame and fabric to make plane motion through synchronous toothed belt and other mechanisms. Send each stitch point on the fabric to be embroidered to the machine needle for embroidery. The speed of the up and down movement of the machine needle is coordinated with the direction, amount and movement speed of the frame movement, so as to make the upper thread and the lower thread stranded, and make the double thread lock stitch on the fabric. When the embroidery goes on continuously, the pattern of computer embroidery is completed.Computer embroidery includes standard embroidery, towel embroidery and sequin embroidery

There are four kinds of needling methods used in towel embroidery, the most commonly used ones are thread stitch filling and vertical filling, the less commonly used ones are straight stitch filling and tatami filling. However, in the four kinds of needling methods, the vertical filling and thread stitch are easy to lose thread in the process of post-processing, so they need to be avoided in some special products production. It is not easy to take off the thread in the post-processing process. The following figure is the towel embroidery made by tatami filling stitch and the corresponding parameters. The filling needle is mainly used in the production of small-area embroidery products. Pay attention to the need to open the automatic sewing, use tatami sewing and ensure the consistency of the two parameters. The best effect of the embroidery is to use this method However, this method of needling consumes the most number of stitches. Generally, it is not recommended to apply the needle method to the production of large-scale towel embroidery products. If there are special requirements for the embroidery of towel embroidery products with large area, it can be treated by filling needle with linear stitch, and the effect of filling needle with tatami can be achieved by using smaller filling needle length and density. The raw material of towel embroidery is towel embroidery thread,Computer towel embroidery machine can embroider any flower shape, any color, flowers and plants embroidered; trees; animals; graphics; comics, etc .; has the characteristics of hierarchy, novelty, strong three-dimensional sense, etc.It has a wide range of uses and can be used in sports, activities, football and patches,Cheerleading, logo patch cheerleading, logo patch,Name, letter, number, monogram, patch category ,State patch, shape patch,Mascot, v-bar, star, club patch ,Graduation Academic Award, State, badge, music, lifestyle patch,Custom design.

  Plain embroidered patches is the basic method of embroidery. The landing stitches must be embroidered on the edge of the pattern. The embroidery threads should be filled in parallel and tightly. Its characteristic is Economical,Flawless craftsmanship,Timely execution,Eye pleasing,It can be used in fashion, shoes, handbags, bags, bras, pajamas, bedding, toys and crafts.

  Sequin embroidery is also a type of embroidery machine, which is to install sequins on the machine, either single sequins or double sequins. The sequin embroidery is composed of several sequins and stitches. The sequins are made of hard texture, smooth surface and high finish materials. With different colors, sizes and shapes, they make the embroidery unique. Superior strength,Exquisite designs,Patch work,Fine&detailed work,Color fastness, Attractive colors,it can be uesd in Hats, shoes, scarves, socks, clothes, towels, pillows and toys.